2019 Ford F550 Rear Hub Nut Torque Specs. Ford f550 rear axle nut torque spec From there you need to ratchet back 5 teeth/notches (1/8) turn on the hub nut for new bearings or 7 teeth/notches (1/6) turn on the hub nut for used bearings.. To verify that there is no side-to-side end play, attach a magnetically mounted dial indicator to the spindle end and place the dial indicator tip on the outboard surface of the hub
2019 Ford F550 Rear Axle BigIron Auctions from www.bigiron.com
Since you have to remove the hub to get the rotor off. I need to know what the torque spec for the rear axle nut is
2019 Ford F550 Rear Axle BigIron Auctions
I assume you are refering to the hub/spindle lock nut From there you need to ratchet back 5 teeth/notches (1/8) turn on the hub nut for new bearings or 7 teeth/notches (1/6) turn on the hub nut for used bearings.. I assume you are refering to the hub/spindle lock nut
Torque Specs for Yoke on Rear Differential for Nut. I seen it has the nut that you tighten to spec and back off so many notches 1999 - 2016 Super Duty - Rear end axle hub nut torque - I have a couple of questions.
Ford f550 rear axle nut socket. From there you need to ratchet back 5 teeth/notches (1/8) turn on the hub nut for new bearings or 7 teeth/notches (1/6) turn on the hub nut for used bearings.. If so it is supposed to be torqued to 60 lb-ft (81 Nm) while rotating the hub occasionally